Chapter 8: Controlling the XT Series
There are a number of ways to interact with the Avaya Room System XT Series:
• Use the XT Remote Control Unit locally on the endpoint itself to navigate the menus (GUI) and
perform user functions and advanced configuration. You view the results on a connected
monitor.
• (Avaya XTE240 only) Use a keyboard and mouse of a computer connected to the endpoint to
navigate its menus instead of the XT Remote Control Unit. This also requires a connected
monitor.
• Use the Avaya Collaboration Control app for Android/iOS devices to control user-level
functionality of the XT Series via an intuitive touch interface. This app is limited to user
features, and does not extend to administration or advanced configuration. For more
information, see User Guide for Avaya Collaboration Control.
• Use the XT Series's web interface to perform nearly all features from the unit's web page.
• Use Avaya Meetings Management's administrator web interface to perform system upgrades,
backups, and add your endpoint to the organization's address book (see
Managing Avaya
Room System XT Series from Avaya Meetings Management on page 148).
Related links
Accessing the XT Series Local Menu on page 137
About the XT Remote Control Unit on page 139
Navigating Menus with the Keyboard and Mouse on page 144
Accessing XT Series Web Interface on page 147
Managing Avaya Room System XT Series from Avaya Meetings Management on page 148
Accessing the XT Series Local Menu
About this task
After switching on the XT Series, the main menu appears on the connected monitor.
To navigate the local menus, use the XT Remote Control Unit or for Avaya XTE240 only, you can
use a keyboard and mouse. You can also access the system via the web, where the main screen
is laid out differently (see
Accessing XT Series Web Interface on page 147).
August 2020 Deployment Guide for Avaya XT Series 137
Comments on this document? infodev@avaya.com
To Next Page
Loading...
