Figure 65: XT Series main menu
The main menu offers the following features:
• Call starts audio and video calls.
• Contacts allows you to view, edit, and call a contact.
• Calendar allows you to view and join meetings scheduled for this endpoint.
• Present starts sharing content from your computer, or displays the connected computer's
content.
• Control Camera adjusts camera position.
• Recording allows you to record and playback a videoconference (may require a license).
• Configure adjusts settings and checks the system status.
Before you begin
(Avaya XTE240 only) To navigate menus with a keyboard and mouse, you must first connect your
computer and then complete the Quick Setup Wizard which ends with installing the Avaya Room
System XT Control utility to use the keyboard and mouse for menu navigation (see
Installing
Avaya Room System XT Control to Use Keyboard and Mouse (Avaya XTE240) on page 116).
Procedure
1. Check the light on the front of the XT Codec Unit. When it is connected to power but
switched off, the LED blinks.
2.
Press the power
key on the XT Remote Control Unit to turn on the XT Codec Unit.
When switched on, the LED remains on (no blinking).
3. (Avaya XTE240 only),Access the main menu by pressing ok/menu on the XT Remote
Control Unit, or select the Avaya Room System XT Control icon on your taskbar.
4. The system home page appears on the monitors.
When you access the system for the first time only, the Quick Setup wizard is displayed
(see Configuring Basic Settings with the Quick Setup Wizard on page 110).
5. Navigate using the XT Remote Control Unit or on the Avaya XTE240 only, you can also
use the keyboard and mouse.
Controlling the XT Series
August 2020 Deployment Guide for Avaya XT Series 138
Comments on this document? infodev@avaya.com
To Next Page
Loading...
