Avaya XT Series - Page 132

Procedure
1. Access the Audio-Input settings. From the XT Series web interface, select Administrator
settings > I/O connections. From the endpoint's main menu, select Configure >
Advanced > I/O connections > Audio - Input.
Figure 63: I/O Connections
2. Select the type of audio input you want to configure.
3. Set the fields as required.
4. From the web interface only, select Save.
5. (Optional) If remote endpoints hear DVI audio when in use, enable the DVI video input.
a. Access the DVI settings. From the XT Series web interface, select Administrator
Settings > I/O Connections > Cameras > DVI. From the endpoint's main menu,
select Configure > Advanced > I/O Connections > Cameras > DVI.
Manually setting up the XT Series
August 2020 Deployment Guide for Avaya XT Series 132
Comments on this document? infodev@avaya.com