Figure 71: Equinox Management
2. Set the fields as required.
Table 28: Granting remote access to Avaya Meetings Management
Field Name Description
Mode If you intend to auto-provision the XT Series from Avaya Meetings
Management, select Cloud and continue to Provisioning Avaya
Room System XT Series endpoints automatically on page 85.
If you intend to provision each XT Series locally, select Local. If
you select Local, the Automatic IP Address and IP Address
fields are displayed.
Note:
Please note that Cloud is not supported by Avaya Meetings
Management 8.3.x. If your deployment is not updated to
Equinox Solution, please set the Mode to Local.
URL This is a read-only field and cannot be edited.
This field might contain the URL of the Avaya Meetings
Management which moved the XT from local management to cloud
management. This can happen when a older management system
controlling your XT Series is upgraded to Equinox Solution.
Automatic IP Address Select Yes for the system to automatically know the Avaya
Meetings Management IP address, sent by Avaya Meetings
Management when controlling the device.
Note:
Only used for Local mode.
Table continues…
Managing Avaya Room System XT Series from Avaya Meetings Management
August 2020 Deployment Guide for Avaya XT Series 149
Comments on this document? infodev@avaya.com
To Next Page
Loading...
