Avaya XT Series - Page 165

H264 H264 H265
4
Baseline profile High profile Main profile
16:09 16:09 16:09
Call bitrate (Kb) Motion Sharpness Motion Sharpness Motion Sharpness
2432 720p60 1080p30 1080p60 1080p60 1080p60 1080p60
2560 1080p60 1080p60 1080p60 1080p60 1080p60 1080p60
3072 1080p60 1080p60 1080p60 1080p60 1080p60 1080p60
3584 1080p60 1080p60 1080p60 1080p60 1080p60 1080p60
4096 1080p60 1080p60 1080p60 1080p60 1080p60 1080p60
When using the built-in MCU to host videoconferences, the total maximum bandwidth of 12Mbps
is shared amongst the participants.
You can also determine whether to use more or less bandwidth for participant video versus shared
content like a presentation, and you can even define the bandwidth limits for each network port on
your XT Series.
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series on page 151.
Procedure
1. Access the call settings. From the XT Series web interface, select Administrator
Settings > Calls > Preferences > General. From the endpoint's main menu, select
Configure > Advanced > Calls > Preferences > General.
Figure 75: General Preferences
4
XT only
Setting Call Bandwidth in XT Series
August 2020 Deployment Guide for Avaya XT Series 165
Comments on this document? infodev@avaya.com