The XT Series GUI and the XT Series Web interface show the file transfer status (successfully
saved or interrupted/failed) for the last 100 transferred files. You can manually clear the saved files
information from the Web interface by clicking Clear Transfer Status.
If the file transfer succeeds, the recorded file is marked as successfully transferred.
To disable recording and playback, follow the procedure below to access the recording settings,
and select No Recording in the Location field.
Before you begin
You may need a license to record meetings on your XT Series, depending on your model. For
more information, see Deployment Guide for Avaya Room System XT Series.
Procedure
1. Access the recording settings from either the web interface or from the endpoint itself.
From the XT Series web interface, select Administrator Settings > Utilities >
Recording > General. From the endpoint's main menu, select Configure > Advanced >
Utilities > Recording > General.
Figure 85: Recording Settings
2. Define the following recording settings:
Enabling and Configuring Recording
August 2020 Deployment Guide for Avaya XT Series 183
Comments on this document? infodev@avaya.com
To Next Page
Loading...
