Figure 97: SNMP Settings
2. Set the fields as required.
Table 52: Configuring SNMP settings
Field Name Description
SNMP management Select Yes to enable an SNMP server.
Administrator name (Optional) Enter a contact name to enable SNMP management for this
device which would appear in an SNMP browser.
Location (Optional) Enter the location of the device, which would appear in an
SNMP browser.
Community Enter the name of the SNMP community that supports the read
operations of SNMP management. Avaya Meetings Management
requires the name to communicate with the gateway in the SNMP
Get/Set Community fields.
The community values are case-sensitive. Typically there is a separate
community for read (GET) called public and a community for write (SET)
called private.
Enable all addresses Select No to restrict SNMP remote access for read operations to specific
computers in the range of the Address and Subnet Mask fields below.
Address Enter the IP address of computers allowed to remotely access SNMP for
read operations.
Subnet mask Enter the Subnet mask to modify the Address field into a range of
addresses allowed to remotely access SNMP for read operations.
Advanced Configuration of the XT Series
August 2020 Deployment Guide for Avaya XT Series 200
Comments on this document? infodev@avaya.com
To Next Page
Loading...
