Avaya XT Series - Page 228

Procedure
1. Access the Screen Link and Mobile settings. From the XT Series web interface, select
Administrator Settings > Utilities > Remote Access > Screen Link/Mobile Link. From
the endpoint's main menu, select Configure > Advanced > Utilities > Remote Access >
Screen Link/Mobile Link.
2. Set the Mode field as required.
3. From the web interface only, select Save.
Remote Access - Screen Link/Mobile Link field descriptions
Name Description
Mode • Disabled: Screen Link and Mobile Link are
disabled.
• Enabled — No PIN: Screen Link and Mobile Link
are enabled and do not require a PIN.
• Enabled — Ask PIN (manual pairing): This is
the default option. Screen Link and Mobile Link
only require a PIN if you want to select an XT
device other than the automatically-paired device.
The automatic pairing operates using an
ultrasonic sound that can be detected by any XTs
that are nearby.
• Enabled — Ask PIN (always): Screen Link and
Mobile Link require a PIN for automatic pairing
and for manual pairing.
Remote Presentation Mode • Automatic: Starts sending the presentation as
soon as Screen Link is activated.
• Manual: Starts sending the presentation as soon
as the user clicks Present.
Screen Link Unpair Mode • Manual: Unpairs the Screen Link manually.
• Automatic: Unpairs the Screen Link client at the
end of the meeting, but only if the pairing was
started during the meeting.
• When the meeting ends: Unpairs Screen Link
clients at the end of the meeting, even if the
pairing was started before the meeting (local
presentation mode).
Advanced Configuration of the XT Series
August 2020 Deployment Guide for Avaya XT Series 228
Comments on this document? infodev@avaya.com