Figure 121: Uploading the CA root certificate
a. Do one of the following:
• Select Upload the CA Certificate you received from the Certificate Authority to
upload a CA root certificate.
• Select Upload the PKCS#7 file contraining the CA Certificate and the Signed
Certificate you received from the Certificate Authority to upload CA root
certificate and signed certificate in a single step.
b. Click Choose File and browse to the CA root certificate or .p7b (PKCS#7) file you
received from the CA.
c. Click Upload.
The certificate is validated and its details appear (
Generating a Certificate Signing Request
for XT Series on page 239).
Tip:
Verify the system's time is synchronized with SNTP, otherwise you may need to wait a
few hours before using this certificate (for details, see
Setting Date and Time on
page 118). You can start using this certificate from the time in the notBefore field in
the signed certificate. The certificate is no longer valid after the date in the notAfter
field has elapsed.
Securing your XT Series
August 2020 Deployment Guide for Avaya XT Series 244
Comments on this document? infodev@avaya.com
To Next Page
Loading...
