Avaya XT Series - Participating in Meetings; Joining a Meeting from the Avaya XT Series Calendar

Figure 33: Connecting cables to the back of the camera
Note that this is an example diagram. The back panel for Deluxe and Flex cameras is
different from this one.
4. Attach the two connectors on the other end of the camera cable as shown in
Figure 34:
Connecting cables to the XT5000 on page 70 and Figure 35: Connecting cables to the
Avaya XT7000 Series on page 70:
a. For the XT5000: The HDMI connector to the HDMI socket labeled 1 on the Avaya XT
Series Camera Switch.
b. For the XT7000: The HDMI connector to the HDMI socket labeled 1 on the XT7000.
c.
The connector for power and serial control must be connected to the
horizontal
socket on the XT Codec Unit.
Connecting Cameras or DVD players
August 2020 Deployment Guide for Avaya XT Series 69
Comments on this document? infodev@avaya.com