the same time, connect them via an audio mixer (see Connecting a Microphone to the XT
Series on page 77).
On the Avaya XTE240, your computer content is automatically displayed on the monitor, but only
ever shared when configured as a personal executive endpoint. When you receive an incoming
call, it automatically displays the XT Series menus to easily allow you accept or reject the call, and
your local camera displays your video on the monitor.
Alternatively, you can quickly share content without connecting your computer using the Avaya
Screen Link feature. You can do so only if your computer has Scopia XT Desktop or Avaya
Equinox
®
Conferencing client and is on the same network as the XT Series. If they are in different
networks, verify there is no NAT or firewall between them. For more information about using the
Avaya Screen Link feature, see the Avaya Room System XT Series User Guide, which is available
from
support.avaya.com.
Procedure
1. If your computer has a DVI or HD port, connect it to the DVI port on the XT Codec Unit.
Alternatively, use the supplied DVI-VGA adapter to connect a VGA cable from the adapter
to the computer's VGA port.
Figure 43: Connecting a computer's display to the XT Series
2.
Connect the computer audio to the audio-in
port on the XT Codec Unit, which supports
both analog and digital optical audio.
Important:
By default, participants in the meeting can hear your computer’s audio even if you
mute the audio on the XT Series.
Connecting a Computer to the XT Series
August 2020 Deployment Guide for Avaya XT Series 81
Comments on this document? infodev@avaya.com
To Next Page
Loading...
