Aventics Marex 3D - Page 103

Troubleshooting
AVENTICS | Marex 3D | R417003094–BDL–001–AA 103
English
The errors in the following table are relayed to Marex 3D from
the Side Power thruster control. Please refer to the
Dev uJsk 043 Warning x.yyy Poti 1 Warn One of the
potentiometers in the
joystick does not
work
Check cabling, repeat
the joystick alignment
Dev uJsk 044 Light x.yyy Poti 1 Alarm One of the
potentiometers in the
joystick does not
work
Check cabling, repeat
the joystick alignment
Dev uJsk 051 Warning x.yyy Poti 2 Warn One of the
potentiometers in the
joystick does not
work
Check cabling, repeat
the joystick alignment
Dev uJsk 052 Light x.yyy Poti 2 Alarm One of the
potentiometers in the
joystick does not
work
Check cabling, repeat
the joystick alignment
Dev uJsk 059 Warning x.yyy Poti 3 Warn One of the
potentiometers in the
joystick does not
work
Check cabling, repeat
the joystick alignment
Dev uJsk 060 Light x.yyy Poti 3 Alarm One of the
potentiometers in the
joystick does not
work
Check cabling, repeat
the joystick alignment
Source Device type Error No. Error state Text message Further information Remedial action
Dev uSlv 001 Light x.yyy guarding
fail
One Marine
Propulsion Controller
of Marex OS III is not
available
Check cabling
Check parameters for
Marex OS control unit
Source Device type Error No. Error state Text message Further information Remedial action
Dev PROP 001 Light x.yyy guarding
fail
One Marine
Propulsion Controller
of Marex OS III is not
available
Check cabling
Check parameters for
Marex OS control unit
Dev PROP 017 Light alarm_main.ctrl Internal error in the
main control of the
engines
Check the MPCs of
Marex OS III and
eliminate the error.
Table 9: Error messages in the 3D Controller
Source Device type Error No. Error state Text message Further information Remedial action
3D_manual_R417003094_DE_EN.book Seite 103 Freitag, 30. November 2018 11:36 11