About this documentation
6 AVENTICS | Marex 3D | R417003094–BDL–001–AA
1 About this documentation
1.1 Validity of this documentation
This instruction manual applies to the ship remote control
system Marex 3D including the following components:
W Joystick Type 531 (for example R417003030 or
R417003096)
W 3D Controller (3460690410)
W Heading sensor (R419801301)
This instruction manual is intended for mechanics, service
technicians and operators.
This manual explains how to assemble, commission and
operate the ship remote control Marex 3D. Marex 3D can be
used in combination with the ship remote controls Marex OSIII
and Marex ECS including corresponding components. Functions
and operation of Marex OS III and Marex ECS will only be
described in this manual if required for the understanding and
operation of Marex 3D. Refer to the manuals on Marex OS III and
Marex ECS for details on those systems.
O Read this manual completely, especially chapter 2 on Safety
instructions, before operating the ship remote control
Marex 3D.
1.2 Required and additional documentation
Before powering up Marex3D make sure to read and
understand the documents listed in table:
O Observe the instructions for the other system components.
O Observe the ship‘s operating instructions.
3D_manual_R417003094_DE_EN.book Seite 6 Freitag, 30. November 2018 11:36 11
To Next Page
Loading...