Safety instructions
12 AVENTICS | Marex 3D | R417003094–BDL–001–AA
W To operate ships equipped with petrol or gas-fueled engines
if all Marex 3D components are installed outside the
hazardous area.
A separate emergency stop must be provided on every
control station. The instructions and warnings referring to
the use of the heading mode must be observed, see also
chapter 2.6, Product- and technology-related safety
messages on page 14.
Intended use includes having fully read and understood this
manual and especially chapter 2, Safety instructions.
2.3 Improper use
Any use other than as described in "Intended use" is improper
and thus inadmissible.
If inappropriate products are installed in applications which are
relevant to safety, unintended operating conditions can be
created which may cause damage to persons or property.
O Only apply products in applications relevant to safety if this
use is clearly specified and permitted in the product docu-
mentation, for example in explosion risk areas or in safety-
related parts of a control system (functional safety).
AVENTICS GmbH declines any responsibility for damage
resulting from improper use. The user of the equipment is fully
responsible for any risk arising from improper use of the
product.
2.4 Personnel qualifications
2.4.1 Qualification of mechanics and service
technicians
The technical activities described in this instruction manual
require basic knowledge of mechanics and electrics as well as
knowledge of the corresponding terminology. For applications
with Marex OS III, profound knowledge is required on
Marex OS III, including the corresponding software and expert
knowledge on ship propulsion systems. To ensure the safe use
of the product, those activities may only be performed by
3D_manual_R417003094_DE_EN.book Seite 12 Freitag, 30. November 2018 11:36 11
To Next Page
Loading...
