About this product
AVENTICS | Marex 3D | R417003094–BDL–001–AA 35
English
4.3.3 Heading sensor
Fig. 7: Heading sensor, R419801301
The heading sensor includes a three-axis, electronic compass
and supplies Marex 3D with precise data on the ship‘s position.
Under dynamic conditions with rough seas, the heading sensor
performs with 2° heading accuracy. In static condition, an
accuracy of 1° is achieved. The device fulfills protection class
IPX6. The sensor is connected to the 3D Controller by a
NMEA2000 cable, see also chapter 9, Accessories, on page 92.
.
Fig. 8: Sensor cable NMEA 2000, R419801829
4.4 Applied standards and classification
The components of Marex3D have been designed in accordance
with the rules of major classification societies.
Electro-Magnetic
Compliance
EN 60945:2002
Maritime Navigation and Radiocommunication Equipment and
System - General Requirements - Methods of Testing and
Required Test Results
IACS E10 Test Specification for Type Approval 2006
3D_manual_R417003094_DE_EN.book Seite 35 Freitag, 30. November 2018 11:36 11
To Next Page
Loading...
