Safety instructions
14 AVENTICS | Marex 3D | R417003094–BDL–001–AA
W If safety devices are taken out of operation in order to work
on the product you must make sure that no risk arises for
persons or property. Observe the additional
documentations.
W Warranty applies exclusively for the configuration supplied.
W Incorrect assembly, unintended use or inappropriate
handling will invalidate the warranty.
W Under no circumstances the product may be subjected to
mechanical load. Never use the product as a handle or step.
Do not place objects on the product.
2.6 Product- and technology-related safety
messages
We recommend to apply warnings in the area of thrusters and
main engines.
WARNING
Risk of damage to persons and property when using the heading mode in waters with
persons or objects nearby.
In the heading mode, the main engines and thrusters may start to operate unexpectedly.
There is a risk of collision with persons or objects nearby.
O Never use the heading mode in areas intended for swimming or diving.
O Never use the bathing platform when the ship is in the heading mode.
O Always tie up your boat at the jetty. Do not use the heading mode as an alternative.
O Do not use the heading mode for berthing maneuvers.
O Do not leave the control station unattended. Be aware that the ship is in movement in the
heading mode.
3D_manual_R417003094_DE_EN.book Seite 14 Freitag, 30. November 2018 11:36 11
To Next Page
Loading...
