Safety instructions
AVENTICS | Marex 3D | R417003094–BDL–001–AA 13
English
authorized personnel or by instructed persons supervised by
authorized personnel.
An authorized person is someone who due to his/her expert
training, knowledge and experience including his/her
knowledge of the relevant regulations can assess the assigned
tasks, recognize possible dangers and take appropriate safety
measures. Authorized personnel must comply with the
applicable specialist regulations.
2.4.2 Qualifications of operators
Along with the qualifications in seamanship which are required
to command a ship, the operator of the ship remote control
Marex 3D must be sufficiently familiar with Marex 3D.
Sufficiently familiar includes having read and understood this
manual and knowing all important control functions and their
operation. For extensive ship control systems, this manual may
not be sufficient.
O Ask for additional operating instructions, from the shipyard
for example. Get instructions from a specialist on the
remote control system.
2.5 General safety instructions
W Observe the valid regulations pertaining to accident
prevention and environmental protection
W Observe the safety instructions and guidelines of the
country in which the product is used.
W Only use AVENTICS products in technically perfect condition.
W Check the product for obvious defects as for example cracks
in the housing or missing screws, caps or sealings.
W You must not modify or convert Marex 3D.
W Persons who install, operate, dismantle or maintain
AVENTICS products must not be under the influence of
alcohol, other drugs or medications which affect the
responsiveness.
W Make sure that safety devices belonging to the product are
available, properly installed and fully operational. Such
safety devices must not be relocated, bypassed or rendered
ineffective.
3D_manual_R417003094_DE_EN.book Seite 13 Freitag, 30. November 2018 11:36 11
To Next Page
Loading...
