About this product
18 AVENTICS | Marex 3D | R417003094–BDL–001–AA
crosswind or current and keep the heading of the ship in a
constant direction as the joystick is moved.
In the thruster mode, the joystick is used to operate the
thrusters only while the main engines are operated via a control
head.
In addition, Marex 3D features a Heading Mode function which
can be switched on by the Heading Mode key at the joystick. The
function is available only if an optional heading sensor is
connected. It allows to hold the bow of the ship automatically in
a constant direction while the joystick is released and in the
Neutral position.
Marex 3D can be operated from up to six joystick stations.
No further operating elements for thrusters are required on the
control station. The joystick combines the operation of bow and
stern thrusters so that all maneuvers can be performed with
more comfort and precision.
A software tool is available to adapt the settings of Marex 3D to
the ship’s requirements. Individual adjustments can be made
for every maneuver. For the protection of electric ON/OFF-
thrusters, it is possible to define that turning maneuvers which
are made when the ship is already in motion are executed by
using the main engines only. Warnings from alternative thruster
controls can be processed.
Trolling is also available in the 3D mode.
3D_manual_R417003094_DE_EN.book Seite 18 Freitag, 30. November 2018 11:36 11
To Next Page
Loading...
