Banner iVu Plus TG Gen2 - Input and Output Flags Bits

User may continue to add more data from any sensor type as required or reserve more sensors into the customizable
space.
Sensor Name and Sensor Type ID are global settings that are part of any individual sensor reservation. When they are
checked, they will be inserted into each sensor reservation.
Here is an example of multiple sensors inspection and its output location on the customizable space.
There are only two Blemish sensors on the current inspection; Blemish3 location will be all zero on the customizable space.
The customizable space had not reserved a Match sensor, Match1 from the inspection will not be outputted on the
customizable space.
9.4.4 Input and Output Flags Bits
Inputs Bits Register (Command Flag Bits)
Command
Set BCR
Mask
Set BCR
String
Trigger
Teach
Latch
Product
Change
Gated
T
rigger
Bit Position
123456789101112131415 0
Input Bits ACK Register (ACK Flag Bits)
Command
ACK
Set BCR
Mask ACK
Set BCR
String ACK
Trigger
ACK
Teach
Latch
ACK
Product
Change
ACK
Gated
T
rigger
ACK
Bit Position
123456789101112131415 0
Output Bits Register (iVu Status Flag Bits)
Execution
Error
System
Error
Teach
Error
Missed
Trigger
Output 3 Output 2 Output 1
Read/
No Read
Pass/Fail
Ready
Latch
Ready
Bit Position
123456789101112131415 0
iVu Plus TG Gen2 Image Sensor
www.bannerengineering.com - Tel: 763.544.3164 115