7 Configuring Sensors
Each sensor type has a shortcut menu available from the inspection menu.
From the Home screen, click inside the Region of Interest (ROI). The ROI is the visual area indicated by a dotted line on
the inspection. In the Demo mode this will be the Banner logo. The dotted line will turn bold and have rotation and size
icons in the corners. At the top of the screen the Inspection Name will change to a black button called Sensor Name. Click
the black Sensor Name button and a drop down box will appear.
No matter what parameter you are setting, if you click inside the ROI it will highlight into a bold dotted line that can be
resized.
7.1 Sensor Configuration Shortcut Menu
Each sensor type has a shortcut menu available from the inspection menu.
From the Home screen, click inside the Region of Interest (ROI). The ROI is the visual area indicated by a dotted line on
the inspection. In the Demo mode this will be the Banner logo. The dotted line will turn bold and have rotation and size
icons in the corners. At the top of the screen the Inspection Name will change to a black button called Sensor Name. Click
the black Sensor Name button and a drop down box will appear.
No matter what parameter you are setting, if you click inside the ROI it will highlight into a bold dotted line that can be
resized.
Area Sensor Blemish Sensor Match Sensor Sort Application
The ROI type is the shape of the area of inspection. The ROI can be a rectangle, circle, or ellipse
Intensity Range is the range
of gray scale values the sensor
should look for. To set the
Intensity Range, use the eye
dropper on the left of the
screen to select the target
feature, then use the slider bar
at the bottom of the display to
fine tune the selection. As the
slider bar is moved, green
highlighted areas indicate
objects the sensor finds.
The Sensitivity slider is used to
fine-tune how much or how
little contrast the sensor will
recognize within the ROI. The
Sensitivity value helps account
for light variations that might
affect how well the sensor
detects edges. The Sensitivity
scale is from 0 to 100 where 0
means least sensitive and 100
means most sensitive. If set
near 0, the sensor will only find
very sharp edges with strong
contrast. If set near 100, the
sensor will find very dim or
blurry edges, and may be
unstable.
-----
Saved Patterns is where to
manage saved patterns
including rename, or delete.
----- -----
The Percent Match slider adjusts for how closely the inspected
part or label matches the reference part or label. The Percent
Match scale is from 0 to 100 where 0 is the most tolerant and 100
is the least tolerant. Percent Match and Rotation Range work
together. For the best results, use a value from 50 to 90
iVu Plus TG Gen2 Image Sensor
www.bannerengineering.com - Tel: 763.544.3164 59
To Next Page
Loading...
