ProductChange Command Group
Command Group Item Description
Do ProductChange [Name] Forces the sensor to switch to the specified inspection. The sensor does
not transmit a response until the sensor has completed the action.
Inspections results will be invalid until the next trigger.
Get ProductChange InspectionNames List of all inspections stored in the sensor.
Examples
>> get productchange inspectionnames\x0D\x0A
<< OK\x0D\x0A
>> do productchange "inspection2"\x0D\x0A
<< OK\x0D\x0A
History Command Group
Command Group Item Description
Get History Passed The number of passed inspections.
Get History Failed The number of failed inspections.
Get History MissedTriggers The number of missed triggers.
Get History TotalFrames The total number of inspections since the history was last cleared.
Get History MinInspectionTime The minimum elapsed time (msec) of the inspection.
Get History MaxInspectionTime The maximum elapsed time (msec) of the inspection.
Do History Clear Clears all history fields (for example pass, fail, sensor history, etc.).
Examples
>> get history passed\x0D\x0A
<< OK\x0D\x0A
<< 13\x0D\x0A
>> get history startframenumber\x0D\x0A
<< OK\x0D\x0A
<< 3\x0D\x0A
>> do history clear\x0D\x0A
<< OK\x0D\x0A
Inspection Command Group
Command Group Item Description
Get Inspection Status This status of the most recent inspection either Pass, Fail, or Idle (no
triggers).
Get Inspection Name The name of the active inspection.
Get Inspection FrameNumber The most recent inspection frame number.
Get Inspection ExecutionTime The most recent inspection execution time in msec.
iVu Plus TG Gen2 Image Sensor
94 www.bannerengineering.com - Tel: 763.544.3164
To Next Page
Loading...
