The View Inspection Log screen is used to debug an inspection, and shows one inspection in read-only mode. Click the
upper-left icon to cycle through views. When in Statistics view, the table title has arrows to switch between Inputs and
Results of the Inspection.
Use the left and right arrow keys at the bottom of the screen to navigate through the all stored Inspection Logs.
Setup
Main Menu > Logs > Inspection Logs > Setup
Use the radio buttons to Disable Logging, to log Passed Inspections, Failed Inspections, or All Inspections.
5.5.2 System Logs
Main Menu
> Logs > System Logs
The System Log contains configuration change information, other notifications, and any errors or warnings that may be
encountered. The list is sorted in descending order with respect to time. The 'Time' associated with each event consists of
the Hour Count (lifetime hours of operation) and the Up Timer (time elapsed since last boot).
• Click the icon in the upper left corner of the screen to show/hide the time column
• Click Clear Log button at the bottom of the screen to clear the System Log
iVu Plus TG Gen2 Image Sensor
www.bannerengineering.com - Tel: 763.544.3164 53
To Next Page
Loading...
