Banner iVu Plus TG Gen2 - Area_Result Command Group; Area_History Command Group

Examples
>> get inspection status\x0D\x0A
<< OK\x0D\x0A
<< Fail\x0D\x0A
>> get inspection executiontime\x0D\x0A
<< OK\x0D\x0A
<< 37.739\x0D\x0A
AREA_RESULT Command Group
Command Group Item Description
Get AREA_RESULT Count The number of detected areas.
Get AREA_RESULT MinArea The size of the smallest detected area.
Get AREA_RESULT MaxArea The size of the largest detected area.
Examples
>> get area_result count\x0D\x0A
<< OK\x0D\x0A
<< 2\x0D\x0A
>> get area_result minarea\x0D\x0A
<< OK\x0D\x0A
<< 7665\x0D\x0A
AREA_HISTORY Command Group
Command Group Item Description
Get AREA_HISTORY MinCount The minimum number of detected areas, since history was last cleared.
Get AREA_HISTORY MaxCount The maximum number of detected areas, since history was last cleared.
Get AREA_HISTORY MinArea The minimum detected area value, since history was last cleared.
Get AREA_HISTORY MaxArea The maximum detected area value, since history was last cleared.
Examples
>> get area_history mincount\x0D\x0A
<< OK\x0D\x0A
<< 1\x0D\x0A
>> get area_history minarea\x0D\x0A
<< OK\x0D\x0A
<< 7665\x0D\x0A
BLEMISH_RESULT Command Group
Command Group Item Description
Get BLEMISH_RESULT Count The number of detected blemishes.
Get BLEMISH_RESULT MinEdgeLength The minimum detected blemish edge length.
Get BLEMISH_RESULT MaxEdgeLength The maximum detected blemish edge length.
iVu Plus TG Gen2 Image Sensor
www.bannerengineering.com - Tel: 763.544.3164 95