To Next Page

To Previous Page

1 Overview of the Sensor

The

iVu Plus TG Gen2 Series Sensor sensor is used to monitor parts for type, size, orientation, shape, and location. No PC

is required to configure the sensor. Instead, the sensor has a color touch screen display (either integrated with the sensor

or available as a remote display) that you can use to set up and monitor inspections. The following features are available:

• Self-contained image sensor; no PC required

• Easy configuration: install/connect iVu, select sensor type, acquire image, set inspection parameters

• Intuitive interface and sophisticated features make powerful inspection capabilities simple

• Multiple sensor configuration

• GUI available in multiple languages (English, French, German, Italian, Spanish, Japanese, Simplified Chinese,

Portuguese, and Turkish)

• 68.5 mm (2.7 in) touch-screen LCD display or separate touch screen display that mounts remotely from the sensor

to allow easy access to the user interface and to view inspection images

• Four sensor types in one package—a match sensor that determines whether a pattern on a label or part matches a

reference pattern; a sort sensor that can recognize and sort up to ten different patterns within the same

inspection; an area sensor that detects whether or not a particular feature (or features) is present; and a blemish

sensor that detects flaws on parts

• Robust IP67 housing with integrated lighting (red, blue, green, or infrared)

• M12 connector with 10 to 30 V dc for power supply and PNP or NPN output

• External trigger input, remote TEACH input, and external strobe output available

• USB port for uploading and downloading of inspections and log files for easy updating and diagnostics

• Software emulator for PC available to evaluate inspections offline based on bitmap images or inspection logs

iVu Plus TG Gen2 Image Sensor

Banner iVu Plus TG Gen2 User Manual

Questions and Answers: