15.Click OK twice and download the program to the PLC.
The connection looks like the one above.
9.4.9 RSLogix5000 Configuration
To create an implicit Class 1 configuration to the iVu Plus using EIP when using a ControlLogix family PLC, configure the
iVu Plus as a “Generic Ethernet Module” under the ENET_MODULE. The following is a sample setup of Banner sensor:
1.
Add a generic Ethernet module to the PLC's Ethernet card.
2. Select Module.
iVu Plus TG Gen2 Image Sensor
www.bannerengineering.com - Tel: 763.544.3164 123
To Next Page
Loading...
