Banner iVu Plus TG Gen2 - Page 122

12.Click Change
in the Module Definition field.
13.
Select the desired connection in the Module Definition window. Each of the items in the Name drop-down menu
represents a fixed grouping of input and output assembly instances (see below).
• Small Assemblies
• O>T PLC Input/iVu Plus Output Assembly 112 (0x70)
• T>O PLC Output/iVu Plus Input Assembly 100 (0x64)
• Large Assemblies
• O>T PLC Input/iVu Plus Output Assembly 113 (0x71)
• T>O PLC Output/iVu Plus Input Assembly 101 (0x65)
• BCR Only
• O>T PLC Input/iVu Plus Output Assembly 113 (0x71)
• T>O PLC Output/iVu Plus Input Assembly 102 (0x66)
14.Select INT as the data type.
iVu Plus TG Gen2 Image Sensor
122 www.bannerengineering.com - Tel: 763.544.3164