External
Main Menu
> Imager > Strobe > External
The External Strobe is a 5V output that can be used for an external light. Setting options are Always ON, Always OFF, or
Exposure Based. If Exposure Based is selected, then the external light is on during the time the sensor is capturing an
image.
Internal
Main Menu > Imager
> Strobe > Internal
The Internal Strobe setting configures the operation of the integrated ring light. Strobe options are Always ON, Always
OFF, or Exposure Based. If Exposure Based is selected, then the ring light is on during the time the sensor is capturing an
image. For UV models, the Always ON option is not available.
5.3.7 FOV (Field of View)
Main Menu > Imager > FOV
The field of view
(FOV) is the area that the sensor can see at a given working distance. The working distance is the
distance from the sensor's lens cover to the part being inspected. The effective FOV can be reduced in order to speed up
the processing time of an inspection or to decrease background noise.
Adjust the Field of View
Select the resize icons to adjust the FOV. After pressing the back button, the Imager menu FOV button updates to say
"Custom" to indicate that a custom FOV is in use.
iVu Plus TG Gen2 Image Sensor
www.bannerengineering.com - Tel: 763.544.3164 35
To Next Page
Loading...
