5.5 Logs Menu
Main Menu
> Logs
The Logs menu icon is on the Main Menu, and is used to set up, view, and save Inspection, Communication, and System
Logs.
5.5.1 Inspection Logs
Main Menu > Logs > Inspection Logs
This menu provides for configuring and viewing Inspection Logs. Inspection Logs are stored inspection records that include
a captured image, the parameters used to inspect it, and the results of that inspection. Up to ten Inspection Logs can be
held in memory on the sensor. The next ten overwrite the previous. Inspection Logs can be saved to the USB flash drive so
that the logs can be imported to the emulator.
View Logs
Main Menu
> Logs > Inspection Logs > View Logs
Inspection Logs appear as a strip of film. You can select a frame to view a specific image. Use the icon in the lower right of
the screen to save the logs to the USB flash drive. Logs saved to the USB flash drive can be imported into the emulator.
Click the Clear button to clear Inspection Logs.
iVu Plus TG Gen2 Image Sensor
52 www.bannerengineering.com - Tel: 763.544.3164
To Next Page
Loading...
