Banner iVu Plus TG Gen2 - Page 134

Table 29: iVu Plus Output Values (Modbus/TCP Input or Holding Registers): CUSTOM MAP
04: Read Input Registers or 03: Read Holding Registers
Input REG # Holding REG # WORD NAME DATA TYPE
1 1001 Input ACK Bits (see Flags on
page
136) see also Inputs
10001-16
16-bit Integer
2 1002 Status Bits (see Flags on page
136) see also Inputs 10017-32
16-bit Integer
3-4 1003-4 Error Code 32-bit Integer
5-6 1005-6 Inspection Number 32-bit Integer
7-8 1007-8 Iteration Count 32-bit Integer
9-10 1009-10 Pass Count 32-bit Integer
11-12 1011-12 Fail Count 32-bit Integer
13-14 1013-14 Missed Triggers 32-bit Integer
15-16 1015-16 Current Inspection Time Float
17 1017 Sensor Pass/Fail Bits 16-bit Integer
18-30 1018-30 reserved 16-bit Integer
31-53 1031-53 Inspection Name 2-word Length + 20 Unicode
chars
54-55 1054-55 Frame Number 32-bit Integer
56-167 1056-167 Customizable Space (112
registers)
varies by sensor
168-171 1168-71 reserved 16-bit Integer
172 1172 Command Status 16-bit Integer
173 1173 Command Response Int16 16-bit Integer
174-75 1174-75 Command Response Int32 32-bit Integer
176-77 1176-77 Command Response Float
178-79 1178-79 Command Response ASCII
String Length
16-bit Integer
180-229 1180-229 Command Response ASCII
String Data
100 byte Unicode char array
230-40 1230-40 reserved 16-bit Integer
Configure Custom Industrial Ethernet (IE) Map
Enable the Custom Map by selecting Custom on the drop-down list.
Click on the yellow arrow button to access the Custom IE Map
screen. The Custom IE Map screen allows choosing
sensor result data that appears on the customizable space.
iVu Plus TG Gen2 Image Sensor
134 www.bannerengineering.com - Tel: 763.544.3164