6. Locate iVu Plus TG in the Hardware catalog.
In the above example, the iVu Plus device is located under Other field devices > PROFINET IO > Sensors
>
Banner Engineering Corp. > Banner Vision Sensors > iVu Series.
7. Select the device and add it to the configuration.
Selection Option Description
Drag Drag iVu Plus TG from the Hardware catalog
directly into the configuration.
Double-click Double-click on iVu Plus TG and add it to the configuration.
iVu Plus TG Gen2 Image Sensor
www.bannerengineering.com - Tel: 763.544.3164 163
To Next Page
Loading...
