Banner iVu Plus TG Gen2 - Page 169

12.Click Assign name
to start the process.
The name is assigned.
Using Siemens SIMATIC STEP 7 (v5.5) Software
Installing the Banner iVu Plus GSD File
Use these instructions to install the Banner iVu Plus GSD file in the Siemens SIMATIC STEP 7 (v5.5) software.
1.
Start Siemens SIMATIC Manager.
2. Select an existing project and open it.
3. Select the Station (PLC) from the Object Hierarchy list.
iVu Plus TG Gen2 Image Sensor
www.bannerengineering.com - Tel: 763.544.3164 169