From the Stored Inspections menu click Select, Add New, Startup, Delete, or Set Name/ID
Select
Main Menu
> Inspection > Stored Inspections > Select
This screen is used to select a new running inspection. Select the name of the inspection to start, and click the Start
Running button that displays.
Add New
Main Menu > Inspection > Stored Inspections > Add New
The Add New button is to add a new inspection. The sensor can store up to 30 inspections. When you add a new
inspection, it will begin running. When adding a new inspection, the Sensor Type and inspection name will be set.
Startup
Main Menu
> Inspection > Stored Inspections > Startup
iVu Plus TG Gen2 Image Sensor
www.bannerengineering.com - Tel: 763.544.3164 31
To Next Page
Loading...
