In the Delimiters screen, there are three delimiter options that you can set:
•
Field Delimiter, which determines what is used to separate data that the sensor is sending out to a remote device.
• End of Frame, which determines the delimiter used to indicate the end of a frame.
• String Delimiter, which determines what is used to enclose a string field during both input and output operations.
Use the drop-down lists to select the appropriate delimiter. The example at the lower part of the screen displays how the
data will look in the output or input streams.
Data Export
Main Menu
> System > Communications > Data Export
When the Data Export is enabled, the sensor will transmit selected inspection data when triggered.
Connection
Main Menu
> System > Communications > Data Export > Connection
The Connection screen is used to enable or disable the Data Export.
Data To Export
Main Menu > System > Communications > Data Export > Data To Export
The Data To Export screen is used to determine the information included in a data export. Data will output in the order
displayed on the screen.
NOTE: Grab the edge of the Data to Export menu and pull down to allow all information to show.
iVu Plus TG Gen2 Image Sensor
www.bannerengineering.com - Tel: 763.544.3164 45
To Next Page
Loading...
