90 pro+ Surface Instruction for Use (209196 REV 8)
Cleaning and Disinfecting
• MCM status indicator
• Surface vents on the sides,
head, and foot end.
• Surface hooks at the head
end—If applicable, slide
the surface hooks off the
head end of the bed. Clean
under the surface and the
surface hooks.
• The handles on the sides or
bottom of the surface—
make sure to clean the
underside of the handles
and the surface area under
the handles.
• Surface - top and bottom
– For surfaces with a surface foot-end flap, remove the
footboard to release the surface. Clean underneath the
surface, and both sides of the surface flap (see below).
To Next Page
Loading...
