pro+ Surface Instruction for Use (209196 REV 8) 95
Decommissioning and Disposal Instructions
DECOMMISSIONING AND DISPOSAL
INSTRUCTIONS
Customers should adhere to all federal, state, regional, and/or local laws
and regulations as it pertains to the safe disposal of medical devices and
accessories. If in doubt, the user of the device shall first contact Baxter
Technical Support for guidance on safe disposal protocols.
• In order to ensure the safe handling and disposal of this product,
follow all relevant warnings provided in the service manual regarding
possible causes of injury when decommissioning the pro+ surface.
• Always ensure that the bed and surface (if applicable) are
unplugged before decommissioning.
• The surface should be cleaned and disinfected, as described in the
instructions for use, before any other decommissioning activities.
• If the decommissioned pro+ surface is still fit for use, Baxter
recommends donating the decommissioned surface to a charitable
organization so that it can be reused.
• If the decommissioned surface is not fit for use, Baxter recommends
dismantling the surface in accordance with the instructions provided
in the service manual.
• Always check and comply with all local and national regulations and
facility protocols when decommissioning a product.
EXPECTED LIFE
Replace the top cover every 2 years. Look at the product information label
to determine the age of the top cover. The label is on the right side of the
cover, near the foot end.
Replace the surface every 5 years. Look at the product information label to
determine the age of the surface. The label is on the surface right side of
the cover, near the foot end.
Other components, such as plastics and metals, are
recyclable in many local jurisdictions. Baxter
recommends recycling all components that can be
recycled locally.
Components which cannot be recycled can be disposed
of via standard waste disposal procedures.
To Next Page
Loading...
