22 pro+ Surface Instruction for Use (209196 REV 8)
CENTRELLA Smart+ Bed
Step 2: Route the Surface Power Cord
Warning—Failure to route the surface power cord correctly can create a
tripping hazard and/or the cord to be pinched during bed functions.
Injury and/or equipment damage could occur.
The surface power cord is
routed along the patient-right
side of the Centrella Smart+
Bed.
NOTES:
•Do not use cable ties to attach the power cord to the bed.
• A label on the surface power
cord shows the routing and the
attachment locations for the
surface power cord on the bed
frame.
The surface power cord has magnets installed on the cord. The power
cord is routed along the patient-right side of the bed to the head end of
the bed. Below is an overall view of the cord routing; the numbered
detail views correlate with Step 13 through Step 17 that follow.
To Next Page
Loading...
