28 pro+ Surface Instruction for Use (209196 REV 8)
CENTRELLA Smart+ Bed
34. Wrap the status indicator strap
around the handle of the footboard
and snap the strap together. Make
sure the attachment location for the
status indicator shows outward
away from the patient.
35. Attach the status indicator to the status indicator label (metal disc)
on the strap.
36. Go to “Step 4: Final Steps” on page 28.
Step 4: Final Steps
37. Plug the surface power cord into AC power.
38. Put the bed in the flat position.
Warning—Keep cords out of the patient area or injury could occur.
39. Attach the magnetized status indicator to its mount on the
footboard. Make sure to store the excess cord away from the patient
area, see below.
Capital Rental
To Next Page
Loading...
