baxter Hillrom pro+ - Safety Information

2 pro+ Surface Instruction for Use (209196 REV 8)
Safety Information
NOTE:
The CareAssist Bed supports a patient weight up to 400 lb (181 kg) and
the CareAssist ES Bed supports a patient weight up to 500 lb (227 kg).
To identify which version of pro+ surface you have, look at the model and
serial number label. The label is on the right side at the foot-end of the top
and bottom covers.
Any reference to a side of the bed or pro+ surface is from the patient’s
view lying in the bed on his or her back.
NOTE:
Throughout this manual the wall outlet for electric AC power (mains
power), we identify as AC power.
SAFETY INFORMATION
WARNING:
Obey these safety instructions to help prevent injury and/or equipment
damage:
• Warning—Read and understand all warnings in this manual and
on the surface itself prior to use with a patient.
• Warning—Follow the product manufacturer’s instructions.
• Warning—The safe working load of the pro+ surface may be
more than the safe working load of the bed frame. Injury or
equipment damage could occur if you exceed the safe working
load of the bed frame.
• Warning—The total weight of the pro+ surface, patient, and
accessories must not exceed the safe working load of the bed
frame.
• Warning—The surface may not be effective for patients outside
of the declared intended use.