pro+ Surface Instruction for Use (209196 REV 8) 13
Surface Features
ADVANCED MICROCLIMATE TECHNOLOGY
The pro+ surface uses MCM status indicator. The MCM status indicator
feature operates continuously and helps decrease localized heat and
moisture buildup that occurs between the patient and the surface.
To turn off the MCM status indicator function for the non-integrated
surface, unplug the surface cord from AC power.
pro+ Surface MCM Status Indicator ON/OFF
Non-Integrated pro+ Surfaces
• ON—Plug the bed into the power source to turn on the MCM
status indicator.
• OFF—Unplug the bed from the power source to turn off the
MCM status indicator.
Integrated pro+ Surfaces for the CENTRELLA Smart+ Bed
The GCI screen is either on the left-head siderail or both head siderails.
Through the MCM status indicator menu control, you can—
• Turn on the MCM status indicator
• Turn on the MCM status indicator and hide the MCM status
indicator menu control so that the MCM status indicator is always
on
•Turn Off the MCM status indicator
When a new patient is admitted to the bed, zeroing the bed for the New
Patient will reset the MCM status indicator to ON. See the bed’s
instructions for use.
10. Zip the x-ray sleeve to close and make sure the x-ray sleeve zippers
are closed on both sides of the surface.
11. Make sure to lower the top cover flaps.
To Next Page
Loading...
