pro+ Surface Instruction for Use (209196 REV 8) 11
Surface Features
LINEN HOLDERS
Rental Surface—The pro+ non-
integrated surface has a status
indicator that attaches to its mount
on the strap that is attached to the
footboard.
To store the status indicator during
transport or cleaning/disinfection of
the surface, put the status indicator in
its storage location on either side of
the surface.
On the bottom of the surface, each
corner has a strap to help retain flat
sheets.
The VersaCare pro+ surface
does not have linen holders.
To Install
1. Put the sheet through the linen
holder.
2. Wrap the sheet over and back
through the linen holder.
3. Repeat for each corner.
4. Make sure the sheet is not too tight as it may impact the pressure
redistribution performance.
To Next Page
Loading...
