18 pro+ Surface Instruction for Use (209196 REV 8)
Installation
INSTALLATION
The internal temperature of the pro+ surface will affect the firmness of
the surface. Allow the surface to normalize to room temperature before
you put the surface in use.
To help prevent injury and/or equipment damage, obey these warnings:
• Warning—Failure to properly assess the fit of the surface relative
to the frame and siderails could result in an entrapment risk that
could cause serious injury or death.
• Warning—It is the user’s responsibility to make sure the patient
is safe if the surface is used on a frame not approved by Baxter.
• Warning—Make sure that hands, arms, legs, and feet are not
under the bed or between the sleep deck sections as they move.
To Troubleshoot Messages
MCM Off for 12 Hours (MCM status
indicator problem)—this message
shows when the MCM status
indicator has been turned off for
over 12 hours. Press Remain Off or
Turn On for the MCM status
indicator feature.
Warning—Failure to correct the error in a timely manner may cause
patient injury.
Error (technical problem)—this
message shows when the MCM
blower does not operate as
intended. Contact your authorized
maintenance persons.
To Next Page
Loading...
