pro+ Surface Instruction for Use (209196 REV 8) 77
900 Beds
Step 2: Route the Surface Power Cord
Warning—Failure to route the surface power cord correctly could create
a tripping hazard and/or the cord to be pinched during bed functions.
Injury and/or equipment damage could occur.
The surface power cord is
routed along the patient-right
side of the 900 Bed.
NOTES:
•Do not use cable ties to attach the power cord to the bed.
• The label on the surface power
cord shows the routing and the
attachment locations for the
surface power cord on the bed
frame.
To Next Page