76 pro+ Surface Instruction for Use (209196 REV 8)
900 Beds
To help prevent injury and/or equipment damage, obey these
warnings:
• Warning—Make sure the surface is installed correctly. Failure to
do so could cause the bed not to articulate as intended.
• Warning—The surface weighs
approximately 50 lb (22.7 kg).
Lift and move the surface with
the handles. Do not twist, and
seek assistance when
necessary.
9. Use the surface handles on the side
of the surface, to lift and install the
surface on the bed. Make sure the
logo side is up and at the foot end
of the bed.
10. Put the bed in this configuration:
• Bed in the highest position
• Knee in the highest position
• Head in the highest position
To Next Page
Loading...
