24 pro+ Surface Instruction for Use (209196 REV 8)
CENTRELLA Smart+ Bed
14. Attach one cord magnet to the
upper frame, aligned with the
patient restraint bracket.
15. Attach one cord magnet to the
upper frame, under the head
section on the triangle bracket.
16. Attach one cord magnet to the lift
arm, above the plastic insert.
17. Put the bed power cord into the
cord clamp that is on the surface
power cord. Use the knob to tighten
the cord clamp.
Gently pull on the bed power cord
to make sure the cord clamp is
attached to the bed power cord.
To Next Page
Loading...
