pro+ Surface Instruction for Use (209196 REV 8) 21
CENTRELLA Smart+ Bed
Warning—The surface weighs
approximately 50 lb (22.7 kg). Lift
and move the surface with the
handles. Do not twist, and seek
assistance when necessary. Failure
to do so could cause injury or
equipment damage.
10. Use the surface handles on the
bottom of the surface to lift and
install the surface on the bed. Make
sure the logo side is up and at the
foot end of the bed.
Warning—Make sure the surface is installed correctly and is
securely attached to the bed. Failure to do so could cause the bed
not to articulate as intended. Injury or equipment damage could
occur.
11. Attach the surface hooks to the
head end of the bed.
12. Put the bed in this configuration:
• Bed in the highest position
• Knee in the highest position
• Head in the highest position
To Next Page
Loading...
