baxter Hillrom pro+ - Page 4

ii pro+ Surface Instructions for Use (209196 REV 8)
PATENTS / PATENT hillrom.com/patents
May be covered by one or more patents. See the above Internet address.
The Hill-Rom companies are the proprietors of European, US, and other
patents and pending patent applications.
FOSS
This product may contain software known as “free” or “open source”
software (FOSS). Hill-Rom uses and supports the use of FOSS. We believe
that FOSS makes our products more robust and secure, and gives us and
our customers greater flexibility. To learn more about FOSS that may be
used in this product, please visit our FOSS website at
hillrom.com/opensource
. Where required, a copy of FOSS source code is
available on our FOSS website.
No part of this text shall be reproduced or transmitted in any form or by
any means, electronic or mechanical, including photocopying, recording,
or by any information or retrieval system without written permission from
Hill-Rom Services, Inc. (Hill-Rom).
The information in this manual is confidential and may not be disclosed to
third parties without the prior written consent of Hill-Rom.
The information in this manual is subject to change without notice. Hill-
Rom makes no commitment to update or keep current, the information in
this manual.
Hill-Rom reserves the right to make changes without notice in design,
specifications, and models. The only warranty Hill-Rom makes is the
express written warranty extended on the sale or rental of its products.
Manufactured by:
HILL-ROM DE MEXICO S. DE R.L. DE C.V.
AVENIDA DEL TELEFONO NO. 200
HUINALA
NUEVO LEON
C.P. 66640 APODACA
MEXICO
Distributed by:
HILL-ROM, INC.
1069 STATE ROUTE 46 E
BATESVILLE, IN 47006-9167
USA
Authorized Australian Sponsor
HILL-ROM PTY LTD.
1 BAXTER DRIVE
OLD TOONGABBIE NSW 2146
AUSTRALIA