Selecting the Installation Site
When selecting an installation location consider the following points:
• The location must be free from vibration, and the inverter must be installed on a wall that can
support the inverter’s weight.
• The inverter can become very hot during operation. Install the inverter on a surface that is fire-
resistant or flame-retardant and with sufficient clearance around the inverter to allow air to
circulate.
• Make sure that sufficient air circulation is provided around the product. When installing the
product inside the panel, carefully consider the position of the product's cooling fan and the
ventilation louvers. The product must be placed for the cooling fan to discharge heat
satisfactorily during the operation.
To Next Page
Loading...
