BENSHAW RSi GM2 Series - Control Menu

32
GM2 Series VFD
Perform Basic Operations
890054-00-00
Control Menu
The following table lists the parameter groups and a description of functions within each group.
Group
Keypad
Display
Description
Operation
-
Configures Acc/Dec times, Start/Stop and
Reference Frequency sources.
Drive
dr
Configures drive Control Mode, Jog operation,
Motor HP setting, torque boost, and parameter
Read/Write/Save/Initialize.
Basic
ba
Configures all other motor parameters, 2
nd
Control and 2
nd
Reference Frequency sources
and Auto Tuning for SVC control.
Advanced
ad
Configures Acc/Dec patterns, Start/Stop modes,
frequency limits, Energy savings, Safe Mode,
Regen Avoidance, Braking and Fore Mode.
Control
cn
Configures SVC, Torque Limits, Speed Search,
KEB, Ride Through and Safe Stop features.
Input Terminal
in
Configures input terminal-related features,
including all digital inputs and analog inputs (V0,
V1 and I2).
Output Terminal
ou
Configures output terminal-related features
including Relay1 and Relay2 outputs and analog
output (AO1).
Communication
cm
Configures communication features for RS-485
and other communication options.
Application
ap
Configures functions related to PID control
including Sleep and Wake Up functions..
Protection
pr
Configures all motor and inverter protection
features along with Fault history.
Motor 2
m2
Configures secondary motor related features.
The 2nd motor appears on the keypad only
when one of the multi-function (digital) input
terminals (In.65~In.69) has been set to 26 (2
nd
Motor).