BENSHAW RSi GM2 Series - Perform Basic Operations; About the Keypad; About the Display

Perform Basic Operations
29
890054-00-00
GM2 Series VFD
Perform Basic Operations
This chapter describes:
• The keypad layout - display and buttons (or keys)
• Button (or key) operation
• Parameter groups and navigation
• Viewing and changing parameter settings
• Specific examples for setting the most common functions
About the Keypad
The keypad is composed of two main components – the display and the operation keys (or
buttons). Refer to the following illustration to identify part names and functions.
About the Display
The following table lists the names and functions of the display and LED indicators.
No.
Name
Function
❶
7-Segment Display
Displays current operational status and parameter
information.
❷
SET Indicator
LED flashes during parameter configuration and when
the ESC key operates as the multi-function (digital)
key.
❸
RUN Indicator
LED turns on (steady) during an operation, and flashes
during acceleration or deceleration.
❹
FWD Indicator
LED turns on (steady) during forward operation.
❺
REV Indicator
LED turns on (steady) during reverse operation.