Learning Advanced Features
Relay changes state based on the analog input signal
levels set with Ad.66~Ad.68. Refer to 5.26
Multi-function (digital) relay On/Off Controlon
page 141 for more details.
Used for external electro-mechanical brake control. Relay
operates based on Ad.41~Ad.47 settings. Refer to 5.25
Brake Control on page 140 for more details.
Relay changes state when the inverter is operating in KEB
mode. Refer to 5.11 Kinetic Energy Buffering - KEB on
page 124 for more details. (This outputs in the energy
buffering state before the input power restoration
regardless of KEB-1 and KEB-2 mode settings.)
Relay changes state when inverter is in a warning mode.
To Next Page
Loading...
